| Server IP : 78.140.185.180 / Your IP : 216.73.216.30 Web Server : LiteSpeed System : Linux cpanel13.v.fozzy.com 4.18.0-513.11.1.lve.el8.x86_64 #1 SMP Thu Jan 18 16:21:02 UTC 2024 x86_64 User : builderbox ( 1072) PHP Version : 7.3.33 Disable Function : NONE MySQL : OFF | cURL : ON | WGET : ON | Perl : ON | Python : ON | Sudo : OFF | Pkexec : OFF Directory : /opt/dell/srvadmin/share/srvadmin-omilcore/ |
Upload File : |
############################################################################
# This file contains various messages that are displayed #
# during installation time. At the time of build, patterns in the scripts #
# will get replaced by the appropriate below listed messages. #
# #
# This file is created as per CR19320. #
# #
############################################################################
#-----------------------------------------------------------------------------------
# Following messages correspond to "srvadmin-install.sh"
#-----------------------------------------------------------------------------------
PATTERN1:
Server Administrator requires an OpenIPMI driver. Currently no OpenIPMI driver
modules for the running kernel are installed on the system. OpenIPMI driver
modules for the running kernel will be installed by ${OPENIPMI_SUBSTRING} OpenIPMI
driver RPM.
EOM
#-----------------------------------------------------------------------------------
PATTERN2:
Note that while TVM is currently active on this system, the system becomes an
IPMI system when a Dell Remote Access Card III is installed. Even though IPMI
is not currently active, an OpenIPMI driver must still be installed, in case
you later install a Dell Remote Access Card III.
EOM
#-----------------------------------------------------------------------------------
PATTERN3:
Server Administrator requires an OpenIPMI driver. Currently no OpenIPMI driver
modules for the running kernel are installed on the system. However, a
"sufficient" version of the OpenIPMI driver RPM is currently installed on the
system. OpenIPMI driver modules for the running kernel will be installed by
building and installing OpenIPMI driver modules using DKMS.
EOM
#-----------------------------------------------------------------------------------
PATTERN4:
Note that while TVM is currently active on this system, the system becomes an
IPMI system when a Dell Remote Access Card III is installed. Even though IPMI
is not currently active, an OpenIPMI driver must still be installed, in case
you later install a Dell Remote Access Card III.
EOM
#-----------------------------------------------------------------------------------
PATTERN5:
Server Administrator requires a newer version of the OpenIPMI driver modules
for the running kernel than are currently installed on the system. The OpenIPMI
driver modules for the running kernel will be upgraded by ${OPENIPMI_SUBSTRING}
OpenIPMI driver RPM.
EOM
#-----------------------------------------------------------------------------------
PATTERN6:
Note that while TVM is currently active on this system, the system becomes an
IPMI system when a Dell Remote Access Card III is installed. Even though IPMI
is not currently active, the OpenIPMI driver modules must still be upgraded,
in case you later install a Dell Remote Access Card III.
EOM
#-----------------------------------------------------------------------------------
PATTERN7:
Server Administrator requires a newer version of the OpenIPMI driver modules
for the running kernel than are currently installed on the system. However, a
"sufficient" version of the OpenIPMI driver RPM is currently installed on the
system. The OpenIPMI driver modules for the running kernel will be upgraded
by building and installing OpenIPMI driver modules using DKMS.
EOM
#-----------------------------------------------------------------------------------
PATTERN8:
Note that while TVM is currently active on this system, the system becomes an
IPMI system when a Dell Remote Access Card III is installed. Even though IPMI
is not currently active, the OpenIPMI driver modules must still be upgraded,
in case you later install a Dell Remote Access Card III.
EOM
#-----------------------------------------------------------------------------------
PATTERN9:
"$0":
NOTE: This script could not stop the OpenIPMI device driver.
You need to stop the OpenIPMI device driver before starting Server
Administrator.
You should stop any applications using the OpenIPMI driver and then attempt
to stop the OpenIPMI device driver.
EOM
#-----------------------------------------------------------------------------------
# Following messages correspond to "srvadmin-openipmi.sh".
#-----------------------------------------------------------------------------------
#-----------------------------------------------------------------------------------
PATTERN10:
" - Minimum driver note: Required min version of OpenIPMI driver = ${LOC_MIN_DRIVER_VERSION}
- Packaged driver note: Version of packaged OpenIPMI driver RPM = ${LOC_PACKAGED_DRIVER_VERSION}"
EOM
#-----------------------------------------------------------------------------------
PATTERN11:
"Status: The OpenIPMI driver module is installed, and the version of the
installed OpenIPMI driver module is equal to or greater than the
minimum version of the OpenIPMI driver that is required by Systems
Management. Leave the installed OpenIPMI driver alone."
EOM
#-----------------------------------------------------------------------------------
PATTERN12:
"Recommended action: Do nothing."
EOM
#-----------------------------------------------------------------------------------
PATTERN13:
"Status: The OpenIPMI driver module is not installed.
The OpenIPMI driver RPM is not installed.
Install the OpenIPMI driver by installing the OpenIPMI driver RPM that
is packaged with Systems Management."
EOM
#-----------------------------------------------------------------------------------
PATTERN14:
"Recommended action: Execute the \'install\' command of this script to
install the OpenIPMI driver RPM."
EOM
#-----------------------------------------------------------------------------------
PATTERN15:
"Status: The OpenIPMI driver module is installed, but the version of the
installed OpenIPMI driver module is either unknown or less than the
version of the OpenIPMI driver that is required by Systems Management.
The OpenIPMI driver RPM is not installed.
Upgrade the OpenIPMI driver by installing the OpenIPMI driver RPM that
is packaged with Systems Management."
EOM
#-----------------------------------------------------------------------------------
PATTERN16:
"Recommended action: Execute the \'install\' command of this script to
install the OpenIPMI driver RPM."
EOM
#-----------------------------------------------------------------------------------
PATTERN17:
"Status: The OpenIPMI driver module is not installed.
The OpenIPMI driver RPM is installed, but the version of the
installed OpenIPMI driver RPM is either unknown or less than the
minimum version of the OpenIPMI driver that is required by Systems
Management.
Install the OpenIPMI driver by upgrading the OpenIPMI driver RPM with
the OpenIPMI driver RPM that is packaged with Systems Management."
EOM
#-----------------------------------------------------------------------------------
PATTERN18:
"Recommended action: Execute the \'install\' command of this script to
upgrade the OpenIPMI driver RPM."
EOM
#-----------------------------------------------------------------------------------
PATTERN19:
"Status: The OpenIPMI driver module is installed, but the version of the
installed OpenIPMI driver module is either unknown or less than the
version of the OpenIPMI driver that is required by Systems Management.
Also, the OpenIPMI driver RPM is installed, but the version of the
installed OpenIPMI driver RPM is either unknown or less than the
minimum version of the OpenIPMI driver that is required by Systems
Management.
Upgrade the OpenIPMI driver by upgrading the OpenIPMI driver RPM with
the OpenIPMI driver RPM that is packaged with Systems Management."
EOM
#-----------------------------------------------------------------------------------
PATTERN20:
"Recommended action: Execute the \'install\' command of this script to
upgrade the OpenIPMI driver RPM."
EOM
#-----------------------------------------------------------------------------------
PATTERN21:
"Status: The OpenIPMI driver module is not installed.
The OpenIPMI driver RPM is installed, and the version of the
installed OpenIPMI driver RPM is equal to or greater than the minimum
version of the OpenIPMI driver that is required by Systems Management.
However, kernel source for the running kernel is not installed;
therefore the OpenIPMI driver modules for the running kernel apparently
could not be built and installed by DKMS when the currently installed
OpenIPMI driver RPM was installed.
Install the OpenIPMI driver by installing kernel source for the running
kernel and then building and installing OpenIPMI driver modules for the
running kernel using DKMS."
EOM
#-----------------------------------------------------------------------------------
PATTERN22:
"Recommended action: Install the \'${GBL_KERNEL_SOURCE_RPM_NAME}\' RPM that is applicable
to the running kernel. Then execute the \'install\' command
of this script to build and install the OpenIPMI driver
modules for the running kernel using DKMS."
EOM
#-----------------------------------------------------------------------------------
PATTERN23:
"Status: The OpenIPMI driver module is installed, but the version of the
installed OpenIPMI driver module is either unknown or less than the
version of the OpenIPMI driver that is required by Systems Management.
The OpenIPMI driver RPM is installed, and the version of the
installed OpenIPMI driver RPM is equal to or greater than the minimum
version of the OpenIPMI driver that is required by Systems Management.
However, kernel source for the running kernel is not installed;
therefore the OpenIPMI driver modules for the running kernel apparently
could not be built and installed by DKMS when the currently installed
OpenIPMI driver RPM was installed.
Upgrade the OpenIPMI driver by installing kernel source for the running
kernel and then building and installing OpenIPMI driver modules for the
running kernel using DKMS."
EOM
#-----------------------------------------------------------------------------------
PATTERN24:
"Recommended action: Install the \'${GBL_KERNEL_SOURCE_RPM_NAME}\' RPM that is applicable
to the running kernel. Then execute the \'install\' command
of this script to build and install the OpenIPMI driver
modules for the running kernel using DKMS."
EOM
#-----------------------------------------------------------------------------------
PATTERN25:
"Status: The OpenIPMI driver module is not installed.
The OpenIPMI driver RPM is installed, and the version of the
installed OpenIPMI driver RPM is equal to or greater than the minimum
version of the OpenIPMI driver that is required by Systems Management.
Kernel source for the running kernel is currently installed, but
apparently kernel source for the running kernel was not installed when
the currently installed OpenIPMI driver RPM was installed. And
therefore the OpenIPMI driver modules for the running kernel could not
be built and installed by DKMS when the currently installed OpenIPMI
driver RPM was installed.
Install the OpenIPMI driver by building and installing the OpenIPMI
driver modules for the running kernel using DKMS."
EOM
#-----------------------------------------------------------------------------------
PATTERN26:
"Recommended action: Execute the \'install\' command of this script to
build and install the OpenIPMI driver modules for the
running kernel using DKMS."
EOM
#-----------------------------------------------------------------------------------
PATTERN27:
"Status: The OpenIPMI driver module is installed, but the version of the
installed OpenIPMI driver module is either unknown or less than the
version of the OpenIPMI driver that is required by Systems Management.
The OpenIPMI driver RPM is installed, and the version of the
installed OpenIPMI driver RPM is equal to or greater than the minimum
version of the OpenIPMI driver that is required by Systems Management.
Kernel source for the running kernel is currently installed, but
apparently kernel source for the running kernel was not installed when
the currently installed OpenIPMI driver RPM was installed. And
therefore the OpenIPMI driver modules for the running kernel could not
be built and installed by DKMS when the currently installed OpenIPMI
driver RPM was installed.
Upgrade the OpenIPMI driver by building and installing the OpenIPMI
driver modules for the running kernel using DKMS."
EOM
#-----------------------------------------------------------------------------------
PATTERN28:
"Recommended action: Execute the \'install\' command of this script to
build and install the OpenIPMI driver modules for the
running kernel using DKMS."
EOM