| Server IP : 78.140.185.180 / Your IP : 3.137.156.0 Web Server : LiteSpeed System : Linux cpanel13.v.fozzy.com 4.18.0-513.11.1.lve.el8.x86_64 #1 SMP Thu Jan 18 16:21:02 UTC 2024 x86_64 User : builderbox ( 1072) PHP Version : 7.3.33 Disable Function : NONE MySQL : OFF | cURL : ON | WGET : ON | Perl : ON | Python : ON | Sudo : OFF | Pkexec : OFF Directory : /home/builderbox/www/vendor/google/apiclient-services/src/Compute/Resource/ |
Upload File : |
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\Compute\Resource;
use Google\Service\Compute\Operation;
use Google\Service\Compute\Policy;
use Google\Service\Compute\RegionSetPolicyRequest;
use Google\Service\Compute\ServiceAttachment;
use Google\Service\Compute\ServiceAttachmentAggregatedList;
use Google\Service\Compute\ServiceAttachmentList;
use Google\Service\Compute\TestPermissionsRequest;
use Google\Service\Compute\TestPermissionsResponse;
/**
* The "serviceAttachments" collection of methods.
* Typical usage is:
* <code>
* $computeService = new Google\Service\Compute(...);
* $serviceAttachments = $computeService->serviceAttachments;
* </code>
*/
class ServiceAttachments extends \Google\Service\Resource
{
/**
* Retrieves the list of all ServiceAttachment resources, regional and global,
* available to the specified project. (serviceAttachments.aggregatedList)
*
* @param string $project Name of the project scoping this request.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, a comparison
* operator, and the value that you want to use for filtering. The value must be
* a string, a number, or a boolean. The comparison operator must be either `=`,
* `!=`, `>`, or `<`. For example, if you are filtering Compute Engine
* instances, you can exclude instances named `example-instance` by specifying
* `name != example-instance`. You can also filter nested fields. For example,
* you could specify `scheduling.automaticRestart = false` to include instances
* only if they are not scheduled for automatic restarts. You can use filtering
* on nested fields to filter based on resource labels. To filter on multiple
* expressions, provide each separate expression within parentheses. For
* example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel
* Skylake") ``` By default, each expression is an `AND` expression. However,
* you can include `AND` and `OR` expressions explicitly. For example: ```
* (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ```
* @opt_param bool includeAllScopes Indicates whether every visible scope for
* each scope type (zone, region, global) should be included in the response.
* For new resource types added after this field, the flag has no effect as new
* resource types will always include every visible scope for each scope type in
* response. For resource types which predate this field, if this flag is
* omitted or false, only scopes of the scope types where the resource type is
* expected to be found will be included.
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return ServiceAttachmentAggregatedList
*/
public function aggregatedList($project, $optParams = [])
{
$params = ['project' => $project];
$params = array_merge($params, $optParams);
return $this->call('aggregatedList', [$params], ServiceAttachmentAggregatedList::class);
}
/**
* Deletes the specified ServiceAttachment in the given scope
* (serviceAttachments.delete)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region of this request.
* @param string $serviceAttachment Name of the ServiceAttachment resource to
* delete.
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000). end_interface:
* MixerMutationRequestBuilder
* @return Operation
*/
public function delete($project, $region, $serviceAttachment, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'serviceAttachment' => $serviceAttachment];
$params = array_merge($params, $optParams);
return $this->call('delete', [$params], Operation::class);
}
/**
* Returns the specified ServiceAttachment resource in the given scope.
* (serviceAttachments.get)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region of this request.
* @param string $serviceAttachment Name of the ServiceAttachment resource to
* return.
* @param array $optParams Optional parameters.
* @return ServiceAttachment
*/
public function get($project, $region, $serviceAttachment, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'serviceAttachment' => $serviceAttachment];
$params = array_merge($params, $optParams);
return $this->call('get', [$params], ServiceAttachment::class);
}
/**
* Gets the access control policy for a resource. May be empty if no such policy
* or resource exists. (serviceAttachments.getIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $region The name of the region for this request.
* @param string $resource Name or id of the resource for this request.
* @param array $optParams Optional parameters.
*
* @opt_param int optionsRequestedPolicyVersion Requested IAM Policy version.
* @return Policy
*/
public function getIamPolicy($project, $region, $resource, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'resource' => $resource];
$params = array_merge($params, $optParams);
return $this->call('getIamPolicy', [$params], Policy::class);
}
/**
* Creates a ServiceAttachment in the specified project in the given scope using
* the parameters that are included in the request. (serviceAttachments.insert)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region of this request.
* @param ServiceAttachment $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000). end_interface:
* MixerMutationRequestBuilder
* @return Operation
*/
public function insert($project, $region, ServiceAttachment $postBody, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('insert', [$params], Operation::class);
}
/**
* Lists the ServiceAttachments for a project in the given scope.
* (serviceAttachments.listServiceAttachments)
*
* @param string $project Project ID for this request.
* @param string $region Name of the region of this request.
* @param array $optParams Optional parameters.
*
* @opt_param string filter A filter expression that filters resources listed in
* the response. The expression must specify the field name, a comparison
* operator, and the value that you want to use for filtering. The value must be
* a string, a number, or a boolean. The comparison operator must be either `=`,
* `!=`, `>`, or `<`. For example, if you are filtering Compute Engine
* instances, you can exclude instances named `example-instance` by specifying
* `name != example-instance`. You can also filter nested fields. For example,
* you could specify `scheduling.automaticRestart = false` to include instances
* only if they are not scheduled for automatic restarts. You can use filtering
* on nested fields to filter based on resource labels. To filter on multiple
* expressions, provide each separate expression within parentheses. For
* example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel
* Skylake") ``` By default, each expression is an `AND` expression. However,
* you can include `AND` and `OR` expressions explicitly. For example: ```
* (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND
* (scheduling.automaticRestart = true) ```
* @opt_param string maxResults The maximum number of results per page that
* should be returned. If the number of available results is larger than
* `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
* get the next page of results in subsequent list requests. Acceptable values
* are `0` to `500`, inclusive. (Default: `500`)
* @opt_param string orderBy Sorts list results by a certain order. By default,
* results are returned in alphanumerical order based on the resource name. You
* can also sort results in descending order based on the creation timestamp
* using `orderBy="creationTimestamp desc"`. This sorts results based on the
* `creationTimestamp` field in reverse chronological order (newest result
* first). Use this to sort resources like operations so that the newest
* operation is returned first. Currently, only sorting by `name` or
* `creationTimestamp desc` is supported.
* @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
* the `nextPageToken` returned by a previous list request to get the next page
* of results.
* @opt_param bool returnPartialSuccess Opt-in for partial success behavior
* which provides partial results in case of failure. The default value is
* false.
* @return ServiceAttachmentList
*/
public function listServiceAttachments($project, $region, $optParams = [])
{
$params = ['project' => $project, 'region' => $region];
$params = array_merge($params, $optParams);
return $this->call('list', [$params], ServiceAttachmentList::class);
}
/**
* Patches the specified ServiceAttachment resource with the data included in
* the request. This method supports PATCH semantics and uses JSON merge patch
* format and processing rules. (serviceAttachments.patch)
*
* @param string $project Project ID for this request.
* @param string $region The region scoping this request and should conform to
* RFC1035.
* @param string $serviceAttachment The resource id of the ServiceAttachment to
* patch. It should conform to RFC1035 resource name or be a string form on an
* unsigned long number.
* @param ServiceAttachment $postBody
* @param array $optParams Optional parameters.
*
* @opt_param string requestId An optional request ID to identify requests.
* Specify a unique request ID so that if you must retry your request, the
* server will know to ignore the request if it has already been completed. For
* example, consider a situation where you make an initial request and the
* request times out. If you make the request again with the same request ID,
* the server can check if original operation with the same request ID was
* received, and if so, will ignore the second request. This prevents clients
* from accidentally creating duplicate commitments. The request ID must be a
* valid UUID with the exception that zero UUID is not supported (
* 00000000-0000-0000-0000-000000000000). end_interface:
* MixerMutationRequestBuilder
* @return Operation
*/
public function patch($project, $region, $serviceAttachment, ServiceAttachment $postBody, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'serviceAttachment' => $serviceAttachment, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('patch', [$params], Operation::class);
}
/**
* Sets the access control policy on the specified resource. Replaces any
* existing policy. (serviceAttachments.setIamPolicy)
*
* @param string $project Project ID for this request.
* @param string $region The name of the region for this request.
* @param string $resource Name or id of the resource for this request.
* @param RegionSetPolicyRequest $postBody
* @param array $optParams Optional parameters.
* @return Policy
*/
public function setIamPolicy($project, $region, $resource, RegionSetPolicyRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'resource' => $resource, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('setIamPolicy', [$params], Policy::class);
}
/**
* Returns permissions that a caller has on the specified resource.
* (serviceAttachments.testIamPermissions)
*
* @param string $project Project ID for this request.
* @param string $region The name of the region for this request.
* @param string $resource Name or id of the resource for this request.
* @param TestPermissionsRequest $postBody
* @param array $optParams Optional parameters.
* @return TestPermissionsResponse
*/
public function testIamPermissions($project, $region, $resource, TestPermissionsRequest $postBody, $optParams = [])
{
$params = ['project' => $project, 'region' => $region, 'resource' => $resource, 'postBody' => $postBody];
$params = array_merge($params, $optParams);
return $this->call('testIamPermissions', [$params], TestPermissionsResponse::class);
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(ServiceAttachments::class, 'Google_Service_Compute_Resource_ServiceAttachments');